Cable Joints, Cable Terminations and Cable Accessories

Call Sales: 01482 37 37 34

3M ™ Barrier Bushing Boots 11kV Inline Cold Shrink (MB)

3M Cold Shrink Barrier Books in the MB63 Series are Cold Applied Barrier Bushing Boots for use with 11kV Polymeric (e.g.

Call us for Price and Availability.

Series: 
MB Series
Unit: 
Set of 3
Unit Description: 
Barrier Boot

3M Cold Shrink Barrier Books in the MB63 Series are Cold Applied Barrier Bushing Boots for use with 11kV Polymeric (e.g. XLPE) Cables and Paper (e.g. PILC) Cables for the installation of 11kV Cable Terminations to transformer and switchgear bushing connections in cable end boxes for inline , straight applications. 3M Cold Shrink Pre Stretched Tubing is factory assembled over a collapsible "former" during manufacture. This means that the jointer can cold insulate the bushing connections by simply positioning the tube over the connection and then removing the support core by hand. This fast and simple process allows the EPDM rubber cold shrink tubes to shrink down over the connection and ensure that an all round continued pressure is achieved. There is no need to use heat, flame or special tools to complete this process.

  • Suitable for use on polymeric cables or paper cables

  • 11kV rated voltage (75kV BIL)

  • Can be applied on cables with conductors up to
    630sq.mm

  • Complete cold system. No heat required

  • Quick, simple and easy installation

  • Track resistant EPDM material

  • 3M Cold Shrink, Pre-Stretch Tubing, enables the installer
    to cold insulate bushing connections using a collapsible
    “former” on which the EPDM rubber is pre-stretched, this
    ensures total all round shrink is achieved.

  • Quick and Easy to Install

  • For further information on these 3M Barrier Bushing Boots for Medium Voltage Terminations, please refer to the 3M data sheet or contact us.

  • 3M Cold Shrink Barrier Books in the MB63 Series are Cold Applied Barrier Bushing Boots for installing 11kV Cable Terminations to transformer and switchgear bushing connections in cable end boxes. These Barrier Boots are suitable for use with Paper Cables (e.g. PILC) or Polymeric Cables (e.g. XLPE) for inline applications.