Cable Joints, Cable Terminations and Cable Accessories

Call Sales: 01482 37 37 34

3M ™ Scotchcast ™ Resin Joints LV Flexible Unarmoured Cable (82F, 82-BF)

3M Scotchcast ™ Flexible Power Cable Splicing Kits in the 82-F and 82-BF Series are flexible inline and tap splices for use on non-shielded portable power cables and cords.

Call us for Price and Availability.

Series: 
82F Series
Unit: 
Kit
Unit Description: 
Joint

Current Product Selection

Cable Diameter mm: 
6mm-20mm

3M Scotchcast ™ Flexible Power Cable Splicing Kits in the 82-F and 82-BF Series are flexible inline and tap splices for use on non-shielded portable power cables and cords. These splices are designed to be used on single or multiple conductor cables, depending on the voltage rating. The 3M Scotchcast ™ 82-F1 and 82-F2 inline splices will accommodate a single-conductor cable rated up to 5 kV or single and multiple conductor cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating). The combined cable diameter range for these two is 0.25 – 1.2 inches (6mm – 30 mm), with a maximum single conductor size of 4/0 AWG. The 3M Scotchcast ™ 82-BF1 tap splice can accommodate cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating) ranging in diameter from 0.25 – 0.8 inches (6 – 20 mm) with a maximum single conductor size of 1/0 AWG.

  • One-piece removable mold

  • 3M Scotchcast Flame-Retardant Compound 2131

  • Scotch Rubber Splicing Tape 23, for sealing mold ends

  • 3M Three-M-Ite™ Elek-Tro-Cut™ Abrasive Cloth 80J Grit

  • Instructions showing proper installation techniques for splicing non-shielded portable
    power cables and cords

  • MSHA Accepted – carries Mine Safety and Health Administration acceptance 07-
    KA060002-MSHA

  • 3M Scotchcast Flame-Retardant Compound 2131 – self-curing resin bonds to
    itself and most modern cable jackets, and requires no torch or other external heat
    source; forms a splice or repair that is abrasion resistant and flame retardant

  • Semi-flexible compound – allows “permanent” splice to bend with cable; for
    installation, handling, reeling, etc.

  • Smooth tapered splice profile – eliminates cable hang-ups and splice end-lifting

  • 3M Scotchcast LV Resin Cable Joint suitable for splicing or re jacketing Non Armoured Flexible Mining Cables, Trailing Cables, and Portable Power Cords

  • For inline single-conductor cables rated up to 5kV

  • For tap single-conductor cables rated up to 1kV

  • For inline and tap multi-conductor cables rated up to 1kV

  • For mine portable cable rated 600/2000 Volts (07-KA060002-MSHA)

  • For use with compression inline connectors (82-F) and compression "C" tap connectors (82-BF)